Raymond Forklift Battery Charger
The Raymond Forklift Battery Charger is designed for charging systems used with Raymond electric forklifts. Charger selection should be based on the forklift model, battery specifications, required charging current, site power supply and connector requirements.
Product Introduction
The Raymond Forklift Battery Charger is designed for charging systems used with Raymond electric forklifts. Charger selection should be based on the forklift model, battery specifications, required charging current, site power supply and connector requirements.
Raymond Charger Configuration at a Glance
|
Charger Model |
DC Output |
Battery Capacity |
Input Power Supply |
Weight |
|
BT-LC-48050P5W |
48V / 50A |
350–440Ah |
2P / 380V |
57 kg |
|
BT-LC-48050P8W |
48V / 50A |
350–440Ah |
3P / 380V |
60 kg |
|
BT-LC-48060P5W |
48V / 60A |
420–480Ah |
2P / 380V |
61 kg |
|
BT-LC-48060P8W |
48V / 60A |
420–480Ah |
3P / 380V |
65 kg |
|
BT-LC-48080P5W |
48V / 80A |
560–630Ah |
2P / 380V |
69 kg |
|
BT-LC-48080P8W |
48V / 80A |
560–630Ah |
3P / 380V |
75 kg |
|
BT-LC-8065P5W |
80V / 65A |
450–550Ah |
2P / 380V |
75 kg |
|
BT-LC-8065P8W |
80V / 65A |
450–550Ah |
3P / 380V |
80 kg |
|
BT-LC-8070P5W |
80V / 70A |
490–600Ah |
2P / 380V |
80 kg |
|
BT-LC-8070P8W |
80V / 70A |
490–600Ah |
3P / 380V |
85 kg |
How to Match the Charger to Your Raymond Forklift
Raymond charger compatibility depends on the forklift model, battery and charging requirements. Check the following before ordering:
Forklift Model: Provide the specific Raymond forklift model for configuration review.
Battery Voltage & Capacity: Confirm the battery chemistry, nominal voltage and rated capacity from the battery nameplate. The charger should be selected according to the battery manufacturer's specified charging requirements.
Charging Current: Select the charging current according to the battery capacity and manufacturer's recommended charging rate. Available configurations include 50A, 60A, 65A, 70A and 80A.
Site Power Supply: Confirm the available 2P / 380V or 3P / 380V input.
Connector & Polarity: Verify the battery connector and polarity.
Compatibility Check: For replacement or new orders, provide the forklift model, battery nameplate and existing charger information for confirmation before production.
For Raymond Charger Replacement
Before quotation, buyers can provide:
Raymond forklift model - Helps identify the equipment configuration.
Battery nameplate - Confirms battery voltage, capacity and type.
Existing charger nameplate - Provides the original charging specifications.
Connector photo - Helps verify the physical connection.
Site power supply - Confirms the required input configuration.
Required quantity - Supports single-unit replacement or fleet orders.
Raymond Charger for Fleet Replacement
For fleet replacement, chargers can be standardized where multiple forklifts use the same battery and charging specifications, subject to technical confirmation.
Manufacturer Support for Raymond Charger Orders
Configuration Review: Review the forklift model, battery specifications, input power and connector requirements before production.
Manufacturing: Manufacture the charger according to the confirmed technical specification and connection requirements.
Pre-Shipment Checks: Check applicable output, input, wiring and connector requirements before shipment. Inspection items can be confirmed with the buyer in advance.
FAQ
Q: Can the charger be supplied with a specified battery connector?
A: Yes. The connector requirement can be confirmed before production based on the battery connection or the existing charger. Buyers can provide a connector photo or technical specification for verification.
Q: What information is needed to confirm the charging profile?
A: The battery type and manufacturer's charging requirements should be provided when available. This information helps confirm whether the selected charger configuration matches the battery's required charging characteristics.
Q: Can technical drawings or specifications be provided before ordering?
A: Yes. Relevant technical information can be discussed during the quotation process so buyers can review the charger configuration and installation requirements before placing the order.
Q: Can inspection requirements be specified by the buyer?
A: Yes. Buyers can communicate required inspection items before production. The applicable inspection scope can then be confirmed according to the order and technical requirements.
Q: Can a sample unit be ordered before a fleet purchase?
A: For projects requiring compatibility verification, a sample order can be discussed before a larger fleet order. The evaluation requirements should be confirmed in advance.
Q: How is the production schedule handled for repeat orders?
A: Repeat orders can be arranged according to the confirmed specification and production schedule. Previous order information can be referenced, while current requirements should be reconfirmed before production.
Hot Tags: raymond forklift battery charger, China raymond forklift battery charger manufacturers, suppliers, factory
You Might Also Like
Send Inquiry
